TT Goggles Model B – Lens Replacement Instructions
TT Goggles Model B – Lens Replacement Instructions
The TT Goggles Model B is designed to allow users to replace the lenses themselves.
Please follow the steps below to perform the replacement.
① Remove the rubber trim (goggle edge trim)
The rubber trim is fitted into a groove along the edge of the goggle frame.
Gently press from the inside to remove the trim from the frame.
② Remove the lens
Apply light pressure to the edge of the lens and carefully push it inward from the outside, tilting it as you remove it.
Be careful not to use excessive force.
③ Insert the new lens
Insert the new lens into the frame in the same orientation and order as when it was removed.
Press it in gently starting from one end to ensure a proper fit.
④ Reattach the rubber trim
Lightly flex the rubber trim and insert it into the goggle frame.
Then, press it along the groove to ensure it is evenly and securely seated all the way around.
